Model：WY-80W-GJ0
Series：WY-80W-**
Pressure generator, instrument calibration device, pressure calibration, sound amplitude instrument calibration, pressure test, casing & tubing pressure test
The pressure scale device is to place the special instrument in the ground casing, simulate the formation conditions of the special instrument under certain pressure and temperature, thereby verifying the performance of the instrument and marking.
Features:
1) The equipment adopts modular design, compact structure and convenient transportation.
2) All modules are centrally laid out for easy production and safety management.
3) Using a gas-driven pump, it can output a stable pressure without additional energy consumption during the pressure-holding process.
4) Can test multiple instruments at the same time
Pump Unit Technical Parameters
Size: 1200L × 750W × 1200L
Max flow: 3.2L/min
Max output pressure: 8Mpa
Safety valve pressure: 10Mpa
Needle valve max operating pressure: 20.6Mpa
Pressure gauge range: 16Mpa
Connection
- Low pressure water inlet: G3/4F (6-point female thread)
- Exhaust outlet: G3/4F (6-point female thread)
- Sewage outlet: G3/4F (6-point female thread)
- Water inlet: G3/4F (6-point female thread)
- High pressure outlet: G1/4
Construction
| Frame | Stainless Steel |
|
| Water tank | Stainless Steel |
|
| Pressure gauge | Stainless Steel |
|
| Valve | Stainless Steel |
|
| Tube | Stainless Steel |
|
| Connections | Stainless Steel |
|
| Hydraulic Cylinder | Anodized aluminum |
|
| Piston | Stainless Steel |
|
| Booster pump head | Stainless Steel |
|
| Cabinet | Stainless Steel |
|
Hydraulic Pressure Static Conditions (@7bar）
| Air Pressure（bar） | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Hydraulic Pressure（bar） | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 |
| Output flow (theoretical) | 0 | 3.2 | 3 | 2.7 | 2.4 | 2 | 1.5 | 1 |
General Layout Drawing
